FREE TABLE!

TABLE FOR SELECTING THE CORRECT PHILLIPS POINT SIZE

    Wood Screws Machine Screws Sheet Metal Screws
Driver Point Size Body Diameter Flat, Oval Round Flat, Oval, Binding Round, Fillister Truss, Brazier, Button Flat, Round, Oval, Stove, Binding
0 0 0 0 0 0 0
1 3/16 2 2 2 2 2 2
3 3 3 3 3 3
  4 4 4 4 4 4  
2 1/4 5 5 5 5 5 5
  6 6 6 6 8 6  
7 7 8 8 10 7
  8 8 10 10 8    
9 9 10
  10            
3 5/16 10 12 12 12 12 12
  12 14 1/4 1/4 1/4 14  
14 16 5/16
4 3/8 18 18 5/16 3/8 5/16  
20 20 3/8 7/16 3/8
  24 24 7/16 1/2 7/16    
1/2 1/2

IMPORTANT: The table above will enable you to determine the Phillips point size required for any Phillips screws or bolts. The No. 2 and No. 3 point sizes cover the range of Phillips screws most commonly used.

If you should want to see a socket head sizing chart you can click on the appropriate button here and you can go to the SAE Socket Head Sizing Chart or click on Metric Socket Head Sizing Chart should you want metric dimensions. If you want to select a slotted screwdriver bit width you might want to visit our Slotted Screw Sizes Chart which gives the width of slot for various sizes of screws and types of screw heads.

Should you need a drill bit of any of the sizes noted above, please click here to go to Aaron's Drill Bits Home Page. You can take your shopping cart with you and accumulate everything on one bill when you check out.

Back to Aaron's Screwdriver Bits Home Page

Back to Aaron's General Store


Copyright 1999 Aaron's General Store